HP Visualize c3000 Manuál s instrukcemi Strana 205

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 246
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 204
Chapter 7 205
Solving Problems
Common Problems and Solutions
Table 7-4 Problems Using a Hard Disk Drive
Problem Solution
The disk drive is not
accessible or does not
respond.
Make sure that all SCSI devices are set to the proper
SCSI ID. (See Chapter 4 for default SCSI ID
settings.)
Check that all SCSI devices are correctly cabled.
Check that the SCSI bus is correctly terminated.
(See Chapter 4 for information on SCSI cabling and
termination.)
Open the disk tray again and close it.
Follow the instructions in “Dealing with a Boot
Failure” later in this chapter.
If the disk drive is external to the system unit, make
sure that its power is turned ON.
If problems persist, contact your system administrator or call your designated
service representative.
Table 7-5 Problems Using the CD Drive
Problem Solution
The CD drive does not
respond to commands (for
example, mount or
swinstall).
Re-enter the commands and make sure you have
typed them correctly.
See the section “Running System Verification Tests”
later in this chapter to verify that the CD drive is
functioning properly.
Make sure power and data cables are connected.
If problems persist, contact your system administrator or call your designated
service representative.
Zobrazit stránku 204
1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 245 246

Komentáře k této Příručce

Žádné komentáře