HP 200 Unified Threat Management (UTM) Appliance Series Rychlý návod stáhnout pdf (Strana 47)

Figure 38 Accessing the CLI through the AUX port without authentication

Configuring password authentication for AUX login

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter one or more AUX user

interface views.

user-interface aux first-number

[ last-number ]

N/A

3. Enable password

authentication.

authentication-mode password

By default, password

authentication is enabled but no

password is configured. To access

the device through the AUX port,

you must configure a password for

authentication.

4. Set a password.

set authentication password

{ cipher | simple } password

By default, no password is set.

5. Configure common settings

for AUX login.

See "Configuring common settings

for AUX login (

optional)."

Optional.

The next time you attempt to log in to CLI through the AUX port, you must provide the configured login

password, as shown in Figure 39.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 149 150

Žádné komentáře

HP 200 Unified Threat Management (UTM) Appliance Series Rychlý návod Strana 47