HP PROCURVE 6120 Uživatelský manuál stáhnout pdf (Strana 448)

100

101

B-41

Monitoring and Analyzing Switch Operation

Traffic Mirroring

Mirroring Configuration Examples

Local Mirroring Using Traffic-Direction Criteria

Example of Local Mirroring Configuration. An administrator wants to

mirror the inbound traffic from workstation “X” on port A5 and workstation

“Y” on port B17 to a traffic analyzer connected to port C24. In this case, the

administrator chooses “1” as the session number. (Any unused session number

from 1 to 4 is valid.) Since the switch provides both the source and destination

for the traffic to monitor, local mirroring can be configured. In this case, the

command sequence is:

1. Configure the local mirroring session.

2. Assign a mirroring source to the session.

Figure B-24. Example of a Local Mirroring Topology

Figure B-25. Example of Configuring Local Mirroring of All Inbound and Outbound Traffic

Switch

Traffic

Analyzer

B17

C24

ProCurve(config)# mirror eth-port

Caution: Please configure destination switch first.

Do you want to continue [y/n]? y

ProCurve(config)# interface a5,b17 monitor all in mirror 1

Configures port C24 as the mirroring

destination (exit port) for session 1.

Mirrors all inbound and outbound traffic on ports A5

and B17 to the mirroring destination configured for

session 1.

Reminder to configure mirroring

destination before configuring

source.

1 2 ... 443 444 445 446 447 448 449 450 451 452 453 ... 588 589

Komentáře k této Příručce

Žádné komentáře

HP PROCURVE 6120 Uživatelský manuál Strana 448

Komentáře k této Příručce

Související produkty a manuály pro Software HP PROCURVE 6120