HP 220mx Uživatelský manuál stáhnout pdf (Strana 27)

Chapter 1 1-15

Setting Up the Jukebox

Connecting a 10-Drive Jukebox, One Host Adapter, Bus 1 and 2

Daisy-Chained, LUN Addressing

Chapter 1: Setting

up the Disk Drive

Setting Up the

Jukebox

Figure 1-4 Connecting a 10-Drive Jukebox, One Host Adapter,

Bus 1 and 2 Daisy-Chained, LUN Addressing

Terminate the daisy-chained bus by plugging a terminator into the

unused port of the second interface (the diagram show the terminator in

port “B1”). In this example you would use a 68-pin differential

terminator in “B1.”

A differential interface port uses a 68-pin high-density terminator. A

single-ended interface port uses a 50-pin high-density terminator.

The same cabling can be done using the single-ended ports.

CAUTION Do not daisy-chain between single-ended and differential interfaces.

Plug a SCSI terminator into one of SCSI ports on each unused interface

(the example diagram shows the terminators on the single-ended port at

“A2” for both interfaces). The terminators can be placed on either port of

the unused interface.

Use a 50-pin high-density active terminator for the single-ended interface

or a 68-pin terminator for the differential interface.

7. To continue with the installation, go to “Connecting Power” in this Chapter.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 119 120

Žádné komentáře

HP 220mx Uživatelský manuál Strana 27