HP 220mx Uživatelský manuál stáhnout pdf (Strana 55)

Chapter 3 3-15

Operating the Jukebox

Setting the SCSI IDs

Operating the

Jukebox

Setting the SCSI IDs

NOTE If you are unfamiliar with basic SCSI addressing or LUN addressing, refer to

Appendix B.

First, determine if you are using basic SCSI addressing or logical unit numbering

(LUN). Setting the LUN mode is explained below.

Next, either view the current SCSI IDs or proceed directly to setting IDs. The next

two procedures are “Viewing the Current SCSI IDs” and “Changing the Current

SCSI IDs.”

Tables showing default SCSI IDs for basic SCSI addressing and LUN addressing are

in Appendix B.

Setting the LUN Mode

READY > ADMIN * > SCSI ID’S * > CHOOSE LUN MODE *

NOTE If you are unfamiliar with basic SCSI addressing or LUN addressing, refer to

Appendix B.

NOTE Check your host system documentation and jukebox application software

documentation to verify that the use of LUNs is supported.

Start with READY in the display.

1. Press

NEXT until ADMIN * displays and then press ENTER.

2. Enter the administration password.

Instructions for entering this password are in “Entering the Administration

Menu Password” previously in this chapter.

3. Press

NEXT until SCSI ID’S displays, and then press ENTER.

4. VIEW ID’S displays. Press

NEXT until CHOOSE LUN MODE * displays and

then press

ENTER. LUN MODE ON or LUN MODE OFF displays and ON or OFF

is blinking.

5. Press NEXT to change the setting and then press ENTER. WAIT FOR UPDATE

and then TURNED OFF or TURNED ON display briefly. Then SCSI ID’S

displays.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 119 120

Žádné komentáře

HP 220mx Uživatelský manuál Strana 55