Hp Netserver L Server series Uživatelský manuál stáhnout pdf (Strana 72)

Chapter 7 Mounting the Server in the Rack

5. Now push the HP NetServer all the way back on the rails, until the flanges

on either side of the front of the base chassis are flush with the rack's front

columns. See Figure 7-5.

Fasten screws

through server's

front flanges

Fasten screws

through server's

front flanges

Figure 7-5. Placing the Base Chassis in the Rack

6. Make sure that the mounting holes in the chassis' front flanges line up

with the Tinnerman nuts you mounted on the rack's front columns. Then

fasten four T-25 Torx screws through the flanges into the Tinnerman

nuts.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 146 147

Žádné komentáře

Hp Netserver L Server series Uživatelský manuál Strana 72