HP VMA-series Memory Arrays Uživatelský manuál stáhnout pdf (Strana 17)

f. In this example, the VMA Array is still set with the factory default IP address of

192.168.1.2. To configure the Laptop Ethernet port with a compatible IP address in the

same subnet as the VMA Array, an IP address of 192.168.1.1 is used for both the IP

Address and Default gateway settings. The typical Subnet mask value of 255.255.255.0

is also configured.

If the VMA Array being upgraded has a non-default IP address configured, the Laptop

can be configured to use the same IP address as configured for the gateway IP address

on the VMA Array. For deployed arrays, this enables you to leave the current IP address

settings as is on the array. Since you will be using a direct connect Ethernet link between

the Laptop and the VMA Array, there will be no IP address conflicts.

g. Once the appropriate and compatible Ethernet configuration settings are made, click OK

on both the Internet Protocol Version 4 (TCP/IPv4) Properties window and the Local Area

Connection Properties window to invoke the settings.

Configuring the Laptop to communicate with the VMA Array 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 28 29

Žádné komentáře

HP VMA-series Memory Arrays Uživatelský manuál Strana 17