HP VMA-series Memory Arrays Uživatelský manuál stáhnout pdf (Strana 8)

c. For each released version of firmware for the VMA32xx Arrays, there are two different

connectivity modes available, either single x8 or dual x4. There is a different firmware

file for each of the two connectivity modes. Select the correct firmware file that is

appropriate for your Array connectivity configuration; either single PCIe cable connection

(single x8) or dual PCIe cable connections (dual x4) from the Array.

For example, if your Array has only a single PCIe cable connecting to a host server or

VMA SAN Gateway, use the Single x8 mode version of the firmware. If your Array has

two PCIe cables connecting it to two VMA SAN Gateways then use the Dual x4 mode

version of the firmware.

Click the download button to the right of the appropriate version and connectivity mode

(single x8 or dual x4) Array firmware file for your connectivity configuration and save

the firmware download to the folder created in step 2.b; c:\VMAupgrade.

d. The HP VMA Array firmware file download is in .zip format. The zip file contains the

Array firmware binary file and an md5 checksum file so you can verify the integrity of

the firmware file. Extract the firmware and md5 checksum files from the downloaded .zip

file. It is recommended that you perform this additional md5 checksum validation with the

firmware file to validate file integrity before proceeding.

The c:\VMAupgrade folder should now have the pscp.exe utility file and the VMA

Array firmware upgrade file in it.

e. Once the VMA Array firmware file is downloaded to the Laptop, the Internet connection

is no longer required for the remainder of the upgrade process. You must connect the

Laptop network port directly to the VMA Array network management port for transfer of

the firmware upgrade file in the next steps.

8 Updating the HP VMA3205 and VMA3210 Array Firmware

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 28 29

Žádné komentáře

HP VMA-series Memory Arrays Uživatelský manuál Strana 8