HP ProLiant BL25p Specifikace stáhnout pdf (Strana 35)

Server component identification 35

Item Description

18 HP Smart Array 6i Controller

19 Power converter modules

20 FC mezzanine (optional)

System maintenance switch

Position Function Default

1* iLO Security override Off

2 Configuration lock Off

3 Reserved Off

4 Reserved Off

5* Password disabled Off

6* Reset configuration Off

7 Reserved Off

8 Reserved Off

*To access redundant ROM, set S1, S5, and S6 to ON.

System maintenance switch procedures

When you perform troubleshooting steps, this guide may instruct you to perform the following procedures:

• Clear the system configuration ("Clearing the system configuration" on page 35).

• Access the redundant ROM ("Accessing the redundant ROM" on page 36).

To complete these procedures, you must change physical settings on the system maintenance switch

(SW1).

Clearing the system configuration

To clear the system configuration:

1. Power down the server blade and disconnect the server blade from all power sources ("Server blade

preparation" on page 11).

2. Remove the access panel ("Access panel" on page 12).

3. Change position 6 of SW1 to on.

4. Install the access panel.

5. Connect the server blade to system power and power up the server blade ("Server blade

preparation" on page 11).

6. Wait for the POST message that prompts you to change the switch setting:

Maintenance switch detected in the "On" position.

Power off the server and turn switch to the "Off" position.

7. Repeat steps 1 through 3.

8. Change position 6 of SW1 to off.

9. Repeat steps 5 through 7.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Žádné komentáře

HP ProLiant BL25p Specifikace Strana 35