HP 2000CP 2500CP Uživatelský manuál stáhnout pdf (Strana 118)

100

101

4-32 Service Tests

HP DesignJet CP Series Printers

D16. Erase EEROM

The purpose of this test is to clear the EEROM.

Perform the Erase EEROM test as follows:

Before erasing the EEROM, it is recommended that a

configuration plot is printed for setup reference because you

will need to re-configure the front-panel settings.

1 In the Diagnostics submenu, scroll to “D16 Erase EEROM” and press

Enter.

Diagnostics

D16 Erase EEROM

2 The “Yes=Enter No=Prev” message is displayed on the front-panel.

3 If you DO NOT want to erase the EEROM press the Previous key. The

message “D1600 Cancelled” will be displayed.

4 If you want to erase the EEROM press the Enter key. While the EEROM

is being erased, a row of “***” will be displayed on the front-panel.

5 Once the EEROM is erased, the “D1600 OK” message is displayed on the

front-panel.

6 If the test fails, the “D1601 Fail” message is displayed on the front-panel.

If the test fails, Replace the Electronics Module  page 8-6.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 347 348

Komentáře k této Příručce

Žádné komentáře

HP 2000CP 2500CP Uživatelský manuál Strana 118

Komentáře k této Příručce

Související produkty a manuály pro Tisk a skenování HP 2000CP 2500CP