HP D5400 Uživatelský manuál stáhnout pdf (Strana 105)

sure the other end of the USB cable is plugged into a USB port on your computer.

After the cable is connected properly, turn off the product and then on again.

If the connections are secure, and nothing has printed several minutes after you sent

a print job to the product, check the status of the product. In the HP Photosmart

Software, click Settings, and then click Status.

Cause: The computer was not communicating with the product.

If this did not solve the issue, try the next solution.

Solution 10: Reset the product

Solution: Turn off the product, and then unplug the power cord. Plug the power

cord back in, and then press the On button to turn on the product.

Cause: The product experienced an error.

The product prints meaningless characters

Try the following solutions to resolve the issue. Solutions are listed in order, with the most

likely solution first. If the first solution does not solve the problem, continue trying the

remaining solutions until the issue is resolved.

•

Solution 1: Reset the product

•

Solution 2: Print a previously saved version of the document

Solution 1: Reset the product

Solution: Turn off the product and your computer for 60 seconds, then turn them

both on and try printing again.

Cause: There was no available memory in the product.

If this did not solve the issue, try the next solution.

Chapter 11

104 Troubleshooting

Troubleshooting

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 220 221

Žádné komentáře

HP D5400 Uživatelský manuál Strana 105