HP Value Serial/USB Receipt Printer II Uživatelský manuál stáhnout pdf (Strana 19)

Chapter 1: Diagnostics and Conguration

Select the hardware options sub-menu to set:

• Printdensity(monochromepapersonly)

 Adjustsprintheadenergyleveltodarkenprintoutoradjustforpapervariations.Whenprinterprintshigh-density

printlines(textorgraphics),itautomaticallyslowsdown.FactorysettingfortheA798IIis100%.

WARNING: Choose a print density setting no higher than necessary to achieve acceptable print density. Failure to

observe this rule may result in a printer service call and may void the printer warranty. Running at a higher energy level

will reduce the printhead life. Consult your HP technical support specialist if you have questions.

• Powersupplylevel(Maxpower)

 Youcanchoosefromthesepowersettingstomatchthepowersupply:

Auto

 LevelI(55W)

 LevelII(75W)

 LevelIII(90W)

• Partialcutdistance

 Allowstheusertosetthedistancethattheknifewillcutacrossareceiptin5stepincrementsbetween110-160.

• Finepartialcutsteps

 Allowstheusertosettheamountofextrastepstheknifewillcutacrossareceipt,between0and4.

• Paperlowsensor

 Senseswhenthepaperrollisgettinglowonpaper.

• Paperlowthresholdextension

 Allowstheusertosettheamountoffootagefortheextensionin5footincrementsbetween-10and20feet.

For more information about See this section

Setting the printer functions “Conguring the printer” on page 14

and settings

Select the rmware features sub-menu to set:

• Paperselectionlockout

• Beepafterknifecut

• Cashdraweropenafterknifecut

• Energy-savingstimeoutvalue

 Allowstheusertoenableandsetthetime-outvalueto15,30,60,120,or240minutes,ortodisablethefeature.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 154 155

Žádné komentáře

HP Value Serial/USB Receipt Printer II Uživatelský manuál Strana 19