HP Value Serial/USB Receipt Printer II Uživatelský manuál Strana 49

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 155
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 48
Chapter 3: Programming Commands 49
Copy character set from ROM to RAM
ASCII ESC : 0 0 0
Hexadecimal 1B 3A 30 30 30
Decimal 27 58 0 0 0
Default: Current active ROM code page
CopiescharactersintheactiveROMsettoRAM.Usethiscommandtore-initializetheuser-denedcharacterset.Code
page437iscopiedbydefaultatinitialization.
This command is ignored if current font is the user font.
Related information
Tomodifycharactersinoneofthecharactersetvariations,suchasrotatedprint,selectoneoftherotatedprintcommands,
copytoRAM,thenusethedeneuser-denedcharactersetcommand(1B26).
Cancel user-dened character
ASCII ESC ? n
Hexadecimal 1B 3F n
Decimal 27 63 n
Value of n: Specied character code.
Range of n: 32–255
Cancelsthepatterndenedforthecharactercodespeciedbyn. Aftertheuser-denedcharacteriscanceled,the
correspondingpatternfromcurrentactiveROMcodepageisprinted.
User-denedcharacterscanbecancelledforeachpitchindependentlybyselectingthepitchusingthe1B21command.
Exceptions
This command is ignored if nisoutofrangeoriftheuser-denedcharacterisnotdened.
Select or cancel emphasized mode
ASCII ESC E n
Hexadecimal 1B 45 n
Decimal 27 69 n
Value of n: 0 (bit 0) not selected
1 (bit 0) selected
(When 0 and 1 are the least
signicant bit, LSB)
Range of n: 0-255
Default: 0 (O )
Startsorstopsemphasizedprintinguntiltheprinterisinitialized,reset,orpoweredoff.Theprinterisresettothestandard
printmodeafteraclearprinter(0x10)commandisreceived.
Exceptions
Onlythelowestbitofn iseffective.Emphasizedprintingcannotbeusedwithbit-imagesordownloadedbit-images.
ThiscommanddoesnotaffectHRIcharacters.
Related information
Thiscommandandtheselectprintmode(s)command(1B21)functionidentically.Theyshouldhavethesamesetting
when used together.
InA793emulation,thiscommandisunrecognizedandtheparameterbyteisputintotheprintbuffer.
Zobrazit stránku 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 154 155

Komentáře k této Příručce

Žádné komentáře