Hp ROM-Based Setup Utility Uživatelský manuál stáhnout pdf (Strana 82)

POST F1 Prompt

The POST F1 Prompt option is a toggle setting that configures the server so the F1 key must be

pressed to proceed when an error occurs during the power-up sequence. A series of system tests

execute during POST, with errors handled in one of the following ways:

• If errors occur that allow the system to continue operating, the system continues to boot but

posts a message.

• If critical components fail or are missing, the server attempts to boot. If it can boot, it posts a

message and an F1 prompt.

• If the system cannot run with the missing or failed components, it halts until those components

are replaced.

Options include:

• Enabled—If an error occurs during startup, the system stops at the F1 prompt. Boot continues

only after the F1 key is pressed.

• Disabled—If an error occurs during startup, the F1 prompt is not displayed and the system

continues to boot the OS.

• Delayed (default)—If an error occurs during startup, the system pauses for 20 seconds at the

F1 prompt and then continues to boot the OS.

82 RBSU menu-driven interface, version 3.xx or later (G6, G7, and Gen8 servers)

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 220 221

Žádné komentáře

Hp ROM-Based Setup Utility Uživatelský manuál Strana 82