Hp Hitachi Dynamic Link Manager Software Uživatelský manuál Strana 435

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 746
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 434
6. Command Reference
411
KAPL01057-I All the paths which pass the specified CHA
port will be changed to the Online status. Is this OK?
[y/n]:y
KAPL01061-I 2 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
-pathid
AutoPATH_ID
Use this parameter to place a single path online.
Specify the current AutoPATH_ID of the target path, which is displayed by using
the
view operation. For details about the view operation, see 6.7 view (Displays
Information). Leading zeros can be omitted (
000001 and 1 indicate the same
AutoPATH_ID); however, when the target AutoPATH_ID is
000000, enter
000000 or 0 for the parameter value.
AutoPATH_IDs are re-assigned every time the host is restarted. When you want
to add a new LU without restarting the host, AutoPATH_IDs are re-assigned to
each path of the LU when you execute the
dlmcfgmgr utility. Always make sure
that you use the
view operation to find the current AutoPATH_ID of the target
path, before executing the
online operation.
-device SCSI-device-name
Use this parameter to place online a path connected to the specified SCSI device.
For SCSI-device-name, specify the value of
Device displayed by executing the
view operation as follows:
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
For details on how to execute the view operation and display the SCSI device
name, see (3) To display LU information in 6.7.2 Parameters (To display
program information). Only one case-sensitive parameter value can be specified.
Example
The following shows an example of how to place online a path whose SCSI
device name is
/dev/sde while confirming command operation.
# /opt/DynamicLinkManager/bin/dlnkmgr online -path
-device /dev/sde
KAPL01050-I The currently selected paths will be changed
to the Online status. Is this OK? [y/n]:y
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
-s
Executes the command without displaying the message asking for confirmation
of command execution from the user. Specify this parameter if you want to skip
Zobrazit stránku 434
1 2 ... 430 431 432 433 434 435 436 437 438 439 440 ... 745 746

Komentáře k této Příručce

Žádné komentáře