Hp Hitachi Dynamic Link Manager Software Uživatelský manuál stáhnout pdf (Strana 534)

100

101

7. Utility Reference

510

7.7 dlmstart Utility for Starting HDLM

You must perform the following operations after installing HDLM:

• Load an HDLM alert driver and a filter driver.

• Configure an HDLM device.

• Start the HDLM manager.

The

dlmstart utility performs the above operations as a batch operation.

If an HDLM alert driver and a filter driver have already been loaded or the HDLM

manager is already running, the relevant operation is not performed.

7.7.1 Format

/opt/DynamicLinkManager/bin/dlmstart

Notes:

• You cannot execute multiple instances of the dlmstart utility at the same time.

• You cannot execute the

dlmstart utility while the dlmcfgmgr utility is

executing.

• If you execute the

dlmstart utility while one or more HDLM devices are

mounted, an error message (KAPL05023-E) is output to the syslog. However,

HDLM operations are not affected.

• If you execute the

dlmstart utility, the I/O and I/O error counts for existing

paths displayed when the HDLM command (

dlnkmgr view -path) is executed

are initialized to 0.

• If you execute the

dlmstart utility, do not change the settings of the sysfs

interface that handles SCSI devices after an HDLM device is configured.

• If you use Red Hat Enterprise Linux, and one or more unpartitioned SCSI devices

exist, an error message (KAPL05023-E) is output to syslog after the

dlmstart

utility is executed. However, HDLM operations are not affected.

1 2 ... 529 530 531 532 533 534 535 536 537 538 539 ... 745 746

Komentáře k této Příručce

Žádné komentáře

Hp Hitachi Dynamic Link Manager Software Uživatelský manuál Strana 534

Komentáře k této Příručce

Související produkty a manuály pro Úložný prostor Hp Hitachi Dynamic Link Manager Software