Hp Integrity rx4610 Server Uživatelský manuál stáhnout pdf (Strana 16)

Chapter 1 Controls, Ports, and Indicators

Rear View

The ports and connectors at the rear are listed below and shown in Figure 1-6.

Figure 1-6 provides a detailed view of the Legacy I/O panel that resides in the

upper-right corner of the rear panel.

• The power connector accepts a standard power cable to connect the

HP Server with the site power supply.

• Ten PCI add-in board expansion slots are available. Eight are hot plug and

two are non-hot plug.

• Each hot plug PCI has status LEDs.

• The mouse port accepts a standard mouse with a PS/2 connector.

• The keyboard port accepts a standard keyboard with a 6-pin PS/2

connector.

• Two USB ports, 0 and 1, with 4 pin connectors are provided for printers,

scanners, and external modems.

• The LAN port is included as an embedded controller based on Intel's

82559 10/100 BaseT Fast Ethernet controller. It has a RJ-45 LAN

connector and two LEDs to indicate LAN speed and valid connection.

• The two Serial Ports are standard 9-pin RS-232 connectors.

• The Parallel Port is a standard PS/2 compatible parallel port with a 25 pin

bi-directional subminiature D connector.

• There are two Interchassis Management Bus (ICMB) connectors, ports 1

and 2.

• The 15 pin video connector is Super VGA compatible.

• The optional external SCSI port provides access to external SCSI devices.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 248 249

Žádné komentáře

Hp Integrity rx4610 Server Uživatelský manuál Strana 16