Hp Integrity rx4610 Server Uživatelský manuál stáhnout pdf (Strana 77)

7 Installing Accessory Boards

Introduction

The HP Server has ten I/O expansion slots available. PCI slots P1-P2 are

64-bit/33 MHz non-Hot Plug I/O expansion slots. PCI slots P3-P10 are 64-bit/66

MHz PCI Hot Plug I/O expansion slots . The PCI expansion slots are contained in

four PCI segments:

• F16, 0 provides for PCI slots 1 and 2, video, and the PXB that controls the

Super I/O functions.

• F16, 1 provides for PCI slots 3 through 5 and the dual-channel LVDS

controller.

• F16, 2 provides for slots 6 through 8.

• F16, 3 provides for slots 9 and 10.

Tested PCI Boards

For a list of tested PCI boards, check for compatibility in the Hardware Tested

Products list for the HP Server under the Service and Support topic for the specific

NOS used in the HP Server at HP’s web site:

http://www.hp.com/

CAUTION Some accessory board outputs may exceed U.S. National

Electrical code (NFPA 70) Class 2 or limited power source

limits and must use appropriate interconnecting cabling in

accordance with the National Electrical Code. (All

Hewlett-Packard boards comply with Class 2.)

Also refer to the Readme file and Chapter 10, "Configuring the HP Server," for

instructions.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 248 249

Žádné komentáře

Hp Integrity rx4610 Server Uživatelský manuál Strana 77