Hp Integrity rx4610 Server Uživatelský manuál stáhnout pdf (Strana 83)

Chapter 7 Installing Accessory Boards

5. Read the documentation included with the accessory board and follow any

special instructions.

6. Identify the accessory slot number to be used. See Figure 7-3.

PCI Hot Plug Slots

Non PCI Hot Plug Slots

Figure 7-3. Accessory Slots

NOTE Refer to the Readme file for the Tested Products List that

shows specific slot recommendations for a particular PCI board

type.

7. Lift the rear cover to expose the non-hot plug PCI adapter board cover.

8. Loosen the screw that secures the non-hot plug PCI adapter board cover.

9. Grasp the cover by its exposed, long side and lift the cover over the non-

hot plug boards away from the chassis. You can completely remove the

cover if you want by unseating the slot hinge. Access is now available to

the two non-hot plug PCI slots and the Legacy I/O board.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 248 249

Žádné komentáře

Hp Integrity rx4610 Server Uživatelský manuál Strana 83