Hp ProLiant DL320e Gen8 v2-Server Uživatelský manuál stáhnout pdf (Strana 30)

Setup 30

Setting up the HP PS1810-24G Switch (optional)

If you intend to use the server with the companion HP PS1810-24G Switch, follow the procedures in this

section.

For more information on switch-related settings and operational procedures, see the documentation for your

switch model on the HP website (http://www.hp.com/networking/support).

Mounting the switch with the server

Mount the switch in a rack, on a wall, or on top of or under a horizontal surface. For detailed instructions, see

the HP PS1810-24G Switch Quick Setup Guide.

Connecting the server to the switch

You can connect the server to the switch through the following methods:

• A simple Ethernet connection with no iLO functionality

• An Ethernet connection with iLO functionality, using the dedicated iLO 4 connector

• An Ethernet connection with iLO functionality, using the shared iLO 4 connector

To establish a simple Ethernet connection:

1. Connect an Ethernet cable to the switch, and then connect the cable to a network jack.

2. Connect an Ethernet cable to the server NIC connector 1 or 2.

3. Connect the cable to any switch network port.

To establish an Ethernet connection with iLO functionality by using the dedicated iLO connector:

1. Connect an Ethernet cable to the switch, and then connect the cable to a network jack.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 99 100

Žádné komentáře

Hp ProLiant DL320e Gen8 v2-Server Uživatelský manuál Strana 30