HP B8C95AA Uživatelský manuál stáhnout pdf (Strana 309)

100

101

HP Designjet T Series — Service Manual 6-73

Removal and Installation - PrintMech PCA (T1100, T1100ps, T610 ONLY)

PrintMech PCA (T1100, T1100ps, T610 ONLY)

Removal

1. Remove the Right Cover on page 6-27.

2. Disconnect all the electrical connectors

from the PrintMech PCA.

3. Remove the grounding cable attachment

screw from the PrintMech PCA.

Switch off the printer and remove the power cable.

The PrintMech PCA does not exist for:

 T1120/T1120ps printers

This procedure is only for T1100, T1100ps, and T610 printers.

Never replace the Printmech PCA at the same time as the Formatter. If you

must replace both parts, always replace one, restart the machine, and then

follow the procedure to replace the other. For more information, refer to page

Replacing the PrintMech PCA, Media Advance Encoder PCA and Formatter

on page 2-3.

Never use a previously used Printmech PCA. This can cause serious problems,

and may make the printer unusable. See Replacing the PrintMech PCA, Media

Advance Encoder PCA and Formatter on page 2-3.

44 inch T1100 printer shown (with Rewinder)

1 2 ... 304 305 306 307 308 309 310 311 312 313 314 ... 489 490

Komentáře k této Příručce

Žádné komentáře

HP B8C95AA Uživatelský manuál Strana 309

Komentáře k této Příručce

Související produkty a manuály pro Tisk a skenování HP B8C95AA