HP B8C95AA Uživatelský manuál Strana 333

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 490
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 332
HP Designjet T Series — Service Manual 6-97
Removal and Installation - Encoder Strip, spring and attachment nut (T1100/T1100ps/
T610)
6. Loosen the T-10 uncapping screw
sufficiently so you can manually move the
Carriage Assembly in step
7.
If you are uncapping a 44 inch
printer, you will need to use either
a very long or very short
screwdriver to loosen the
uncapping screw. In this way, you
can loosen the screw and pass the
rewinder motor.
7. Push the Carriage Assembly into the print
path.
8. Unclip the Encoder Strip tensioner from the
right hand end.
44 inch T1100 printer shown (with Rewinder)
2
1
Zobrazit stránku 332
1 2 ... 328 329 330 331 332 333 334 335 336 337 338 ... 489 490

Komentáře k této Příručce

Žádné komentáře