
HP Designjet T Series — Service Manual 6-245
Removal and Installation - Starwheel Motor
Starwheel Motor
Removal
1. Remove the Front Cover on page 6-16.
2. Remove the
Left Cover on page 6-30.
3. Remove the Electronics Module Main PCA
and P
SU. See page
6-202or 6-205
depending on the printer model.
4. Remove the
Left Spittoon on page 6-214.
5. Disconnect the Starwheel Motor electrical
connector.
6. Carefully pull the two gear wheels off their
shafts to gain access to the Starwheel
Motor attachment screws.
Switch off the printer and remove the power cable.
Komentáře k této Příručce