HP B8C95AA Uživatelský manuál Strana 343

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 490
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 342
HP Designjet T Series — Service Manual 6-107
Removal and Installation - Trailing Cable (T1100/T1100ps/T610)
21. Unroute the Trailing Cables.
22.Remove the Trailing Cables from the
printer.
Installation
1. Use an alcohol (from the Lubrification Kit or
Tool Kit) dampened cloth to remove all
traces of residual adhesive from the double
sided pads removed earlier before
applying new pads in the same positions
as the original pads.
When you finish installing or replacing this component, you must perform the
necessary Service Calibrations. To find which calibrations you must perform,
see Service Calibration Guide to Removal and Installation
on page 6-5.
Make sure you carry out the following actions during the installation of the
Trailing Cable
Zobrazit stránku 342
1 2 ... 338 339 340 341 342 343 344 345 346 347 348 ... 489 490

Komentáře k této Příručce

Žádné komentáře