HP B8C95AA Uživatelský manuál Strana 143

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 490
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 142
HP Designjet T Series — Service Manual 3-35
Service Tests (Diagnostics)
If there is a Failure at any point during the tests, the Front Panel will display
the relevant System Error Code. To trouble shoot any displayed error
codes, see
System Error Codes - Full Descriptions on page 2-7.
2 The Rewinder te
st starts and the front Panel displays the following messages:
Starting Horsburgh.
Starting Nvm
Accessing Nvm
Starting PWM ManagerLuna
Starting ENC ManagerLuna
Setting encoder position
3 The Front Panel prompts you to make sure the media is unloaded and the
spin
dle is removed.
4 Remove the media from the printer.
5 Remove the spindle from the spindle holders.
6 Press any key to continue.
7 The Front Panel displays the following messages and results:
Moving Rewinder Forward
Moving Rewinder Backward
8 The Front Panel shows the test complete display for a few seconds.
9 The Front Panel prompts you to shutdown the printer to complete the test.
10 Press any key to shutdown the printer.
Zobrazit stránku 142
1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 489 490

Komentáře k této Příručce

Žádné komentáře