
HP Designjet T Series — Service Manual 6-109
Removal and Installation - Trailing Cable (T1120/T1120ps)
Trailing Cable (T1120/T1120ps)
The Trailing Cable, as a service part, is included with the Ink Supply Tubes. For information about
the service part, see
Scan-Axis Assemblies (T1120/T1120ps) on page 5-22.
For the disassembly procedure of the Ink Supply Tubes, see
Ink Supply Tubes (T1120/T1120ps) on
page 6-193.
Removal
1. Remove the Left Cover on page 6-30.
2. Remove the
Right Cover on page 6-27.
3. Remove the
Front Panel on page 6-47.
4. Remove the
Top Cover on page 6-50.
5. Remove the
Window Position Sensor on
page 6-53.
6. Loosen the T-10 uncapping screw
sufficiently so you can manually move the
Carriage Assembly in step 7.
7. Push the Carriage Assembly into the print
path.
Switch off the printer and remove the power cable.
Komentáře k této Příručce