HP EliteDesk 705 G3 Microtower PC Uživatelský manuál stáhnout pdf (Strana 105)

Control panel message Description Recommended action

3. Back up contents and replace hard drive.

302-Hard Disk 2: SMART Hard Drive Detects

Imminent Failure

Hard drive is about to fail. (Some hard drives

have a hard drive rmware patch that will x an

erroneous error message.)

1. Determine if hard drive is giving correct

error message. Run the Drive Protection

System test under using F2 Diagnostics

when booting the computer.

2. Apply hard drive rmware patch

if applicable. (Available at

http://www.hp.com/support.)

3. Back up contents and replace hard drive.

309 – 30C: Hard Disk 3–6: SMART Hard Drive

Detects Imminent Failure

Hard drive is about to fail. (Some hard drives

have a hard drive rmware patch that will x an

erroneous error message.)

1. Determine if hard drive is giving correct

error message. Run the Drive Protection

System test under using F2 Diagnostics

when booting the computer.

2. Apply hard drive rmware patch

if applicable. (Available at

http://www.hp.com/support.)

3. Back up contents and replace hard drive.

3F0–Boot Device Not Found Boot device not found. Insert boot device or load operating system.

3F1–Hard Disk 1 Error Hard disk 1 error. 1. Check and/or replace cables.

2. Clear CMOS. (See Password security and

resetting CMOS on page 101.)

3. Replace the hard disk drive.

3F2–Hard Disk 2 Error Hard disk 2 error. 1. Check and/or replace cables.

2. Clear CMOS. (See Password security and

resetting CMOS on page 101.)

3. Replace the hard disk drive.

400-Serial Port A Address Conict Detected Both external and internal serial ports are

assigned to the same resources.

1. Remove any serial port expansion cards.

2. Clear CMOS. (See Password security and

resetting CMOS on page 101.)

3. Recongure card resources and/or run

Computer Setup or Windows utilities.

401-Serial Port B Address Conict Detected Both external and internal serial ports are

assigned to the same resources.

1. Remove any serial port expansion cards.

2. Clear CMOS. (See Password security and

resetting CMOS on page 101.)

3. Recongure card resources and/or run

Computer Setup or Windows utilities.

402-Serial Port C Address Conict Detected Both external and internal serial ports are

assigned to the same resources.

1. Remove any serial port expansion cards.

2. Clear CMOS. (See Password security and

resetting CMOS on page 101.)

3. Recongure card resources and/or run

Computer Setup or Windows utilities.

403-Serial Port D Address Conict Detected Both external and internal serial ports are

assigned to the same resources.

1. Remove any serial port expansion cards.

2. Clear CMOS. (See Password security and

resetting CMOS on page 101.)

POST numeric codes and text messages 97

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 137 138

Komentáře k této Příručce

Žádné komentáře

HP EliteDesk 705 G3 Microtower PC Uživatelský manuál Strana 105

Komentáře k této Příručce

Související produkty a manuály pro ne HP EliteDesk 705 G3 Microtower PC