
Rear panel components
Rear panel components
1 PS/2 keyboard connector (purple) 7 Power cord connector
2 DisplayPort monitor connectors 8 PS/2 mouse connector (green)
3 VGA monitor connector 9 Serial port
4 USB SuperSpeed ports (blue) 10 RJ-45 (network) jack
5 USB SuperSpeed Plus ports (blue)* 11 USB 2.0 ports (black) with keyboard
wakeup function
6 Audio-out jack for powered audio devices (green) 12 Audio-in jack (blue)
NOTE: An optional second serial port and an optional parallel port are available from HP.
If using a USB keyboard, HP recommends connecting the keyboard to one of the USB 2.0 ports with the wakeup feature. The
wakeup feature is also supported on the PS/2 connector if enabled in BIOS F10 Setup.
When a device is plugged into the microphone/headphone jack, a dialog box will pop up asking if you want to use the jack for a
microphone or a headphone. You can recongure the jack at any time by double-clicking the Audio Manager icon in the
Windows taskbar.
When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and/or the
integrated graphics on the system board may be used. The specic graphics card installed and software conguration will
determine the behavior.
The system board graphics can be disabled by changing settings in BIOS F10 Setup.
*USB SuperSpeed Plus port
Your product has two USB SuperSpeed Plus ports. This type of port, also called a USB 3.1 Gen 2 port, supports transfer speeds
up to 10 Gbps. For the best performance, follow these guidelines.
●
Use only USB SuperSpeed Plus-certied cables, 1 meter or less, with USB SuperSpeed Plus–certied devices.
●
Periodically inspect the electrical contacts of the cable and device for damage, dirt, or corrosion; replace cables that are
worn or damaged.
●
Route the USB SuperSpeed Plus cable away from other cables; do not bundle the cable with other cables.
●
Place the device and cable away from other high-powered products or products that may produce high electrical
radiation.
Rear panel components 3
Komentáře k této Příručce