HP EliteDesk 705 G3 Microtower PC Uživatelský manuál stáhnout pdf (Strana 37)

8. To install a new expansion card, hold the card just above the expansion socket on the system board then

move the card toward the rear of the chassis (1) so that the bottom of the bracket on the card slides into

the small slot on the chassis. Press the card straight down into the expansion socket on the system

board (2).

NOTE: When installing an expansion card, press rmly on the card so that the whole connector seats

properly in the expansion card socket.

9. Rotate the slot cover retention latch back in place to secure the expansion card.

10. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if

needed.

11. Replace the computer access panel.

12. Reconnect the power cord and turn on the computer.

13. Lock any security devices that were disengaged when the computer access panel was removed.

14. Recongure the computer, if necessary.

Expansion cards 29

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 137 138

Žádné komentáře

HP EliteDesk 705 G3 Microtower PC Uživatelský manuál Strana 37