HP EliteDesk 705 G3 Microtower PC Uživatelský manuál stáhnout pdf (Strana 42)

Installing a 9.5 mm slim optical drive

1. Prepare the computer for disassembly (Preparation for disassembly on page 18).

2. Remove the access panel (Access panel on page 19).

3. If you are installing a slim optical drive in a bay covered by a bezel blank, remove the front bezel and

then remove the bezel blank. See Front bezel on page 20 for more information.

4. Follow the instructions for removing the optical drive if one was installed. Refer to Removing a 9.5 mm

slim optical drive on page 32.

5. Align the small pin on the release latch with the small hole on the side of the drive and press the latch

rmly onto the drive.

6. Slide the optical drive through the front of the chassis (1) all the way into the bay so that the green latch

locks onto the chassis frame (2).

34 Chapter 4 Removal and replacement procedures – Microtower (MT) chassis

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 137 138

Žádné komentáře

HP EliteDesk 705 G3 Microtower PC Uživatelský manuál Strana 42