HP C30D Uživatelský manuál Strana 146

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 483
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 145
3-94 Troubleshooting Analysis Guide (TAGs)
8
Turn the printer off.
Reconnect J/P12.
Disconnect J/P41.
Turn the printer on.
Check J/P8-11 for +24 Vdc.
Is the voltage +24 Vdc?
No: Replace the PCL board, then turn to TAG 002: Check & Problem Resolution.
Yes: Continue.
9
Turn the printer off.
Reconnect J/P41.
Disconnect J/P23.
Turn the printer on.
Check J/P8-11 for +24 Vdc.
Is the voltage +24 Vdc?
No: Continue.
Yes: Replace the high voltage unit, then turn to TAG 002: Check & Problem Resolution.
10
Turn off the printer and unplug the power cord.
Disconnect J/P41.
Check P41-35 to P23-5 for continuity to ground.
Is there continuity?
No: You have failed to isolate the problem. Return to the beginning of this TAG.
Yes: Repair or replace the connectors or wiring from P41-35 to P23-5, then turn to TAG 002:
Check & Problem Resolution.
11
Turn the printer off.
Reconnect J/P11.
Disconnect J/P91.
Turn the printer on.
Check J/P8-13 for +24 Vdc.
Is the voltage +24 Vdc?
No: Go to #21 in this TAG.
Yes: Continue.
Zobrazit stránku 145
1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 482 483

Komentáře k této Příručce

Žádné komentáře