HP C30D Uživatelský manuál stáhnout pdf (Strana 464)

100

101

Introduction

9-10 General Printer Maintenance

This reveals the pick pressure adjusters, illustrated in Figure 9-3, Paper Pick Pressure

Adjusters, below:

Figure 9-3. Paper Pick Pressure Adjusters

3 To adjust paper pick tension for the upper cassette, identify the adjuster corresponding

to that cassette, then:

• To decrease the pressure, correcting multiple feeds: loosen the screws, pivot the

adjuster up, and tighten the screws.

• To increase the pressure, easing the paper feed: loosen the screws, pivot the

adjuster down, and tighten the screws.

4 To adjust paper pick tension for the lower cassette, identify the adjuster corresponding

to that cassette, then:

• To decrease the pressure, correcting multiple feeds: loosen the screws, pivot the

adjuster down, and tighten the screws.

• To increase the pressure, easing the paper feed: loosen the screws, pivot the

adjuster up, and tighten the screws.

5 Test the adjustments by closing the front cover and sending paper through the printer.

You may need to adjust the lever several times (repeating Steps 3 or 4, and 5) before

the pressure is set properly.

6 When the tension is set properly, reinstall the cassette release cover and close the

printer’s front cover.

1 2 ... 459 460 461 462 463 464 465 466 467 468 469 ... 482 483

Komentáře k této Příručce

Žádné komentáře

HP C30D Uživatelský manuál Strana 464

Komentáře k této Příručce

Související produkty a manuály pro Tisk a skenování HP C30D