HP C30D Uživatelský manuál stáhnout pdf (Strana 294)

100

101

(014 intentionally excluded)

5-16 Diagnostic Tests

018 Duplex Clutch Test Sequence

1 Go to: 018

2 Press: READY to run the test. The first flipper engages, accompanied by a continuous

clicking sound, and “7-0” appears on the display.

3 Press: READY to activate the next clutch or flipper. Listen for the clicking sound as it

engages. The number on the display changes to indicate the next clutch or flipper. The

display codes and the clutch or flipper they represent are listed in the following chart.

4 To check a specific clutch or flipper, press READY repeatedly until the code on the

display corresponds to the item you want to check. Manually activate the sensor. Con-

firm that the display changes when you activate the sensor.

These codes may indicate specific error conditions:

5 Press: STOP to exit.

Table 5-18. Duplex Clutch Test Displays

Display Indication

7-0 Duplex exit flipper

7-1 Duplex roller clutch A

7-2 Duplex re-entry flipper

7-3 Duplex roller C solenoid

Table 5-19. Duplex Clutch Test Error Displays

Display Indication

069 Duplex is not installed.

090 Cover is open. Close cover.

1 2 ... 289 290 291 292 293 294 295 296 297 298 299 ... 482 483

Komentáře k této Příručce

Žádné komentáře

HP C30D Uživatelský manuál Strana 294

Komentáře k této Příručce

Související produkty a manuály pro Tisk a skenování HP C30D