HP INTEGRITY RX3600 Uživatelský manuál stáhnout pdf (Strana 205)

100

101

NOTE: The extraction handles latch into the open position with an audible click.

6. Pull the extraction handles to lift the memory carrier assembly out of the chassis (Figure 6-12).

NOTE: To avoid damage to the extraction handles, HP recommends rotating the handles

inward and snapping them into the locked position when servicing the system DIMMs or

any time the carrier is out of the chassis. Before replacing the memory carrier, press the

button to release the extraction handles. Use the handles to replace the memory carrier into

the chassis.

Figure 6-12 Removing and Replacing the Memory Carrier Assembly

Extraction Handle

Release Button

Extraction Handles

Front Chassis

Guide Slot

Front Bezel

Processor Board Assembly

Access Door

Replacing the Memory Carrier Assembly

CAUTION: Ensure the processor board assembly is fully seated before you replace the memory

carrier assembly. The processor board assembly access door must be flush with the front bezel.

To replace the memory carrier assembly, follow these steps:

1. Ensure that the extraction handles are positioned in the outward, unlocked position.

2. Align the memory carrier assembly with the front and rear chassis guide slots.

Removing and Replacing the Memory Carrier Assembly 205

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 355 356

Komentáře k této Příručce

Žádné komentáře

HP INTEGRITY RX3600 Uživatelský manuál Strana 205

Komentáře k této Příručce

Související produkty a manuály pro Barebone serveru HP INTEGRITY RX3600