HP INTEGRITY RX3600 Uživatelský manuál stáhnout pdf (Strana 82)

IMPORTANT: Windows 2003 Server places the video controller into a non-standard resolution with a refresh rate

of 55Hz. Some LCD monitors are not capable of rendering a screen with refresh rates lower than 60Hz. Use one of

the following methods to resolve this issue:

• Use a monitor capable of 55Hz refresh rates. Virtually all analog monitors and the majority of LCD monitors are

capable of this.

• Use a LAN-based client to remotely access the server's iLO2 Integrated Remote Console (vKVM) feature for the

installation.

Setup Checklist

Use the checklist in Table 3-10 to assist you with the console setup process.

Table 3-10 Setup Checklist

XActionStep

Standard and Advanced

1. Determine access method to select and connect cables.

2. Determine LAN configuration method and assign IP address

if necessary.

Preparation1

There are three methods to configure the LAN for iLO 2 MP access:

• DHCP with DNS

• ARP Ping

• RS-232 serial port

Configure the iLO 2 MP LAN2

command line using the default user name and password.

Log on to the iLO 2 MP3

Change the default user name and password on the administrator

account to your predefined selections.

Change default user name and

password

Set up the user accounts if using the local accounts feature.Set up user accounts5

Set up the security access settings.Set up security access6

Access the host console using method of choice.Access the host console7

Advanced

Activate advanced features by entering a license key.Activate Advanced Pack Features

1 For details on Advanced Pack Features see the HP Integrity iLO 2 MP Operations Guide.

Console Setup Flowchart

Use this flowchart as a guide to assist in the console setup process.

82 Installing the System

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 355 356

Žádné komentáře

HP INTEGRITY RX3600 Uživatelský manuál Strana 82