HP Modular Smart Array 500 Starter Kit Uživatelská příručka stáhnout pdf (Strana 46)

46 Alphabetical list of commands

create volume

Description Creates a volume in a vdisk. You can specify a size and name for the volume, and map it to hosts.

Syntax

create volume vdisk vdisk size size[B|KB|MB|GB|TB|KiB|MiB|GiB|TiB]

[mapping ports.LUN] name [access read-write|rw|read-only|ro|no-access] [lun LUN]

[ports port] [ovms-uid ID]

Parameters vdisk vdisk

Name or serial number of the vdisk to create the volume in. For syntax, see Command syntax.

size size[B|KB|MB|GB|TB|KiB|MiB|GiB|TiB]

Sets the volume size using the current base, as shown by show cli-parameters. The unit can be

specified as follows:

• If base 2 is in use: B (bytes), KiB (kibibytes), MiB (mebibytes), or GiB (gibibytes)

• If base 10 is in use: B (bytes), KB (kilobytes), MB (megabytes), or GB (gigabytes)

If no unit is specified, the unit is blocks.

mapping ports.LUN

Optional. The ports and LUN to use for all hosts that are not explicitly mapped (called the default

mapping). For syntax, see Command syntax. If this argument is omitted, the volume is unmapped

and its LUN is set to None. (You can add or remove mappings by using map volume and unmap

volume.)

name

A name for the new volume.The name is case sensitive, cannot include a comma, double quote, or

backslash, and can have a maximum of 20 bytes. A name that includes a space must be enclosed in

double quotes.

access read-write|rw|read-only|ro|no-access

Optional. The access permission for hosts connected to the controller for this volume: read-write (rw),

read-only (ro), or no-access. When a volume is created with no access, the volume is masked. The

default is read-write.

lun LUN

Optional if the access parameter is set to no-access. Specifies the LUN to assign to the mapping

on all ports. If this parameter is omitted, the default LUN is presented. You cannot use both this

parameter and the mapping parameter.

ports port

Optional. The ports through which the host can access the volume. For syntax, see Command syntax.

ovms-uid ID

For a volume to be accessed by an OpenVMS host, assign a volume ID in the range 1–32767 to

identify the volume to the host.

Example Create the 20-GB volume V1 on vdisk VD1, and map it to ports A1 and B1 using LUN 5:

# create volume V1 vdisk VD1 size 20GB ports a1,b1 lun 5

Info: Command completed successfully. (V1) - The volume was created.

Žádné komentáře

HP Modular Smart Array 500 Starter Kit Uživatelská příručka Strana 46