HP 7000 dl Router Series Uživatelská příručka stáhnout pdf (Strana 14)

100

101

SROS Command Line Interface Reference Guide Basic Mode Command Set

Size (in bytes) of the ping packet (valid range: 1 to 1448).

Timeout in Seconds:

If a ping response is not received within the timeout period, the ping is considered unsuccessful (valid range: 1

to 5 seconds).

Extended Commands:

Specifies whether additional commands are desired for more ping configuration parameters.

Source Address (or interface):

Specifies the IP address to use as the source address in the ECHO_REQ packets.

Data Pattern:

Specify an alphanumerical string to use (the ASCII equivalent) as the data pattern in the ECHO_REQ packets.

Sweep Range of Sizes:

Varies the sizes of the ECHO_REQ packets transmitted.

Sweep Min Size:

Specifies the minimum size of the ECHO_REQ packet (valid range: 0 to 1448).

Sweep Max Size:

Specifies the maximum size of the ECHO_REQ packet (valid range: Sweep Min Size to 1448).

Sweep Interval:

Specifies the interval used to determine packet size when performing the sweep (valid range: 1 to 1448).

Verbose Output:

Specifies an extended results output.

Usage Examples

The following is an example of a successful

ping

command:

ping

Target IP address:

192.168.0.30

Repeat count[1-1000000]:

Datagram Size [1-1000000]:

100

Timeout in seconds [1-5]:

Extended Commands? [y or n]:

Type CTRL+C to abort.

Legend: '!' = Success '?' = Unknown host '$' = Invalid host address

'*' = Request timed out '-' = Destination host unreachable

'x' = TTL expired in transit

Pinging 192.168.0.30 with 100 bytes of data:

!!!!!

Success rate is 100 percent (5/5) round-trip min/avg/max = 19/20.8/25 ms

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 940 941

Komentáře k této Příručce

Žádné komentáře

HP 7000 dl Router Series Uživatelská příručka Strana 14

Komentáře k této Příručce

Související produkty a manuály pro Sítě HP 7000 dl Router Series