HP 7000 dl Router Series Uživatelská příručka stáhnout pdf (Strana 561)

SROS Command Line Interface Reference Guide BRI Interface Configuration Command set

bonding txinit-timer <seconds>

Use the bonding txinit-timer command to specify the value (in seconds) for the originating endpoint

negotiation timeout. Use the no form of this command to return to the default value.

Syntax Description

<seconds> Specifies the number of seconds the endpoint waits to detect the BONDING

negotiation frame pattern from the remote endpoint (when a call is connected)

before considering the BONDING negotiation a failure

Default Values

<seconds> 10 seconds

Command Modes

(config-bri 1/2)# BRI Interface Configuration Mode required

Functional Notes

Specifies the length of time the originating endpoint attempts to detect the BONDING negotiation pattern

from the answering endpoint before deciding the BONDING call has failed.

Usage Examples

The following example defines a txinit-timer value of 15 seconds:

(config)#interface bri 1/2

(config-bri 1/2)#bonding txinit-timer 15

Žádné komentáře

HP 7000 dl Router Series Uživatelská příručka Strana 561