HP 7000 dl Router Series Uživatelská příručka stáhnout pdf (Strana 522)

SROS Command Line Interface Reference Guide DSX-1 Interface Configuration Command Set

framing [d4 | esf]

Use the framing command to configure the framing format for the DSX-1 interface. This parameter

should match the framing format set on the external device. Use the no form of this command to return to

the default value.

Syntax Description

d4 D4 superframe format (SF)

esf Extended superframe format

Default Values

<format> esf

Command Modes

(config-t1 1/1)# T1 or DSX-1 Interface Configuration Mode required.

(config-t1 1/2)#

Functional Notes

A frame is comprised of a single byte from each of the T1’s timeslots; there are 24 timeslots on a single T1

circuit. Framing bits are used to separate the frames and indicate the order of information arriving at the

receiving equipment. D4 and ESF are two methods of collecting and organizing frames over the circuit.

Usage Examples

The following example configures the DSX-1 interface for D4 framing:

(config)#interface t1 1/2

(config-t1 1/2)#framing d4

Žádné komentáře

HP 7000 dl Router Series Uživatelská příručka Strana 522