Hp StorageWorks Scalable File Share Uživatelský manuál Strana 287

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 362
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 286
Recovering degraded MDS services on systems using EVA4000 storage 9–63
6. In the example in the previous step, the /dev/sdc component is shown to have failed, while the
/dev/sdb component is operational. You can determine which LUN the /dev/sdc component is
associated with by entering the command shown in the following example:
# ls -l /dev/hpls | grep sdc$
lrwxrwxrwx 1 root root 9 May 4 01:49 /dev/hpls/dev22a -> /dev/sdc
In this example, LUN 22 (/dev/hpls/dev22a) is the failed mirror component.
7. Remove the failed mirror component and then add it again, as shown in the following example:
# mdadm --remove /dev/md0 /dev/sdc
mdadm: hot removed /dev/sdc
# mdadm --add /dev/md0 /dev/sdc
mdadm: hot added /dev/sdc
NOTE: The mdadm --remove command may fail. This is normal and you can proceed to run
the mdadm --add command.
8. At this point, the RAID device will recover and start to resynchronize itself. You can check the status
and progress of the resynchronization of the device using the mdadm command, as shown in the
following example:
# mdadm --detail /dev/md0
/dev/md0:
.
.
.
State : clean, degraded, recovering
.
.
.
Rebuild Status : 26% complete
.
.
.
Number Major Minor RaidDevice State
0 8 16 0 active sync /dev/sdb
1 0 0 -1 removed
2 8 32 0 spare /dev/sdc
When the resynchronization is complete, the status information will change, as shown in the following
example:
# mdadm --detail /dev/md0
/dev/md0:
.
.
.
State : clean
.
.
.
Number Major Minor RaidDevice State
0 8 16 0 active sync /dev/sdb
1 8 32 1 active sync /dev/sdc
You can check the progress of the resynchronization process by examining the event log as follows:
sfs> show log facility=storage && age < "5m"
.
.
.
2004/11/02 10:28:56 storage n south2: mds8: /proc/mdstat:
md0 : active raid1 sdc[1] sdb[0]
10485504 blocks [2/1] [U_]
[=>...................] recovery = 6.8% (721344/10485504)
finish=2.9min speed=55488K/sec
.
.
.
Zobrazit stránku 286
1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 361 362

Komentáře k této Příručce

Žádné komentáře